This application will allow you to utilize TOSHIBA MFPs to print and scan.
e-BRIDGE Print & Capture is an application that allows you to print and scan from TOSHIBA MFPs utilizing your Android device.
关键功能：
- 从云存储服务（框，Dropbox，Google Drive，OneDrive）或通过Toshiba MFP或共享打印机的打印文档（JPEG/PDF）或网络文件夹
- Print images stored in Android or captured by the device's Camera
- Print web pages and emails with Android print services
- 利用高级MFP打印设置，例如副本数量，双工，颜色模式（BW/color/twin Color），打印模式（正常/私人/私人/hold/multi Station*），纸张类型，纸张尺寸，订书钉，忽略空白页面和碳粉保存
- 从东芝MFP扫描文档，然后将其保存到您的Android设备，网络文件夹中，将其上传到云存储服务，或通过电子邮件发送
- 可以在网络上通过e-BRIDGE Print & Capture在e-BRIDGE Print & Capture上的扫描仪上扫描QR码在网络上发现Toshiba MFP，或通过搜索您最近使用的MFPS的历史
- Secure access for print and scan using your NFC enabled mobile device. (optional card reader required, available only on supported MFPs, not supported on Android 10 or later)
- Authentication and department codes are recommended to maintain office security
* Optional Enabler required
--------------------------------------
系统要求
- Supported e-STUDIO models should be used
- SNMP and Web Service settings on the MFP must be enabled
- Please contact your dealer or sales representative about configuring this application when using with user authentication or department codes
--------------------------------------
支持的语言
中文（简化），中文（传统），丹麦语，荷兰语，英语（美国），英语（英国），芬兰语，法语，德语，意大利语，挪威语，波兰语，俄语，西班牙语，瑞典语，瑞典语，土耳其语，土耳其语，葡萄牙语
--------------------------------------
Supported Models
Please refer to the following page for supported models.
https://www.toshibatec.com/supported_models/
--------------------------------------
支持的操作系统
Android 7, 8, 9, 10, 11, 12, 13
--------------------------------------
Website for e-BRIDGE Print & Capture
Please refer to the following page for Website.
https://www.toshibatec.com/cnt/products_overseas/mobile_solutions/e_bridge/
--------------------------------------
笔记
- Before using this App with a cloud storage service, install the cloud storage app on your device
- MFPs may not be discovered under the following conditions. If not discovered, you may manually enter the hostname or use the QR Code
*IPv6 is used
*SSL is used in the Web Service Setting
*Other unknown reasons
- It is recommended to print the QR Code in Black and White for best scanning results
- Hold/Private prints are available with the e-STUDIO2550C series when an optional hard disk is installed
- When using Android printing services, the contents displayed on the preview screen may differ from the printed result
- User name cannot contain "@" mark
- Part of the feature may not function properly with your device depending on the support level of the service
The company names and product names are trademarks of their respective companies.
阅读更多信息
